7 Ton Front End Loader
Rated Load
7000kg
Bucket Capacity
4.2m³
Revaro Wheel Loaders are a versatile yellow metal machine. Whether you need a wheel loader for use in landscaping, agricultural, construction, waste management, forestry, or mining applications. Revaro wheel loaders make your material handling and loading jobs safer, faster, more precise and profitable.
Dimensions
| Specification | Value |
|---|---|
| Tread | 2360mm |
| Overall length (bucket on the ground) | 8900mm |
| Overall width (Outside the tyres) | 3035mm |
| Bucket width | 3320mm |
| Overall height | 3620mm |
| Wheel base | 3450mm |
Specifications
| Specification | Value |
|---|---|
| Rated Load | 7000kg |
| Bucket Capacity | 4.2m³ |
| Operating weight | 24.8T |
| Speed - Forward I / reverse I | 6.8/6.8km/h |
| Speed - Forward II/ reverse II | 12.7/12.7km/h |
| Speed - Forward III/ reverse III | 27.6/27.6km/h |
| Speed - Forward IV/ reverse IV | 40km/h |
| Max. tractive force | 220kN |
| Max. climbing gradient | >25° |
| Max. dumping angle | 45° |
| Max. dumping height | 3200mm |
| Dumping reach | 1268mm |
| Overturn angle of bucket | ±45° |
| Max. Breakout force | 220kN |
| Max excavating depth | 50mm |
| Rising time of the boom | ±6.5s |
| Total cycling time | ±11s |
| Min. Turning radius | 5950mm |
| Crossing radius | 7010mm |
| Turning angle of the frames | 40° |
| Oscillating angle of the rear axle | ±13° |
Tyres
| Specification | Value |
|---|---|
| Front axle | Fixed with frame |
| Rear axle | Swing type |
| Tyre specification | 26.5-25 |
| Inflating Pressure - Front | 0.38 - 0.40mPa |
| Inflating Pressure - Back | 0.36 - 0.38mPa |
Suspension / Brakes
| Specification | Value |
|---|---|
| Foot brake | Brake on 4 wheel |
| System pressure | 17.5mPa |
| The highest oil pressure of brake | 80bar |
| Hand brake | Electrical ctrl & spring boosting |
| Released oil pressure of hand brake | 10.2mPa |
| Brake valve model | LT17MFEA-4X/080/40M |
| Booster model | SB0210-2E1/112A |
Steering hydraulic system
| Specification | Value |
|---|---|
| Type | Hydraulic steering |
| Model of steering oil pump | 1117132182 |
| Steering unit model | BZZ3-125 |
| Steering limit valve | XF-B6 |
| Flow amplified valve | ZLF25A1 |
| Displacement of pump | 80ml/r |
| System pressure | 19±0.5mPa |
| Steering cylinder | ɸ110x405mm |
| Maximum steering angle | 40° |
Engine
| Specification | Value |
|---|---|
| Model | QSM11-C290 / WD12G310E221 |
| Type | 4-stroke, water cooling, turbine charged |
| Rated power | 216 / 226kW |
| Rated speed | 2100r/min |
| Max. torque | 1478/1000 / 1600/1200-1500Nm/r/min |
| Start type | Electrical start / oil and electricity cutoff |
Fuel & Hydraulic system
| Specification | Value |
|---|---|
| Working oil pump | P7600-F112/P124-G35DIG |
| Displacement of oil pump | 112(+80)ml/r |
| System pressure | 20±0.5mPa |
| Boom cylinder | ɸ180x885mm |
| Tilt cylinder | ɸ220x590mm |
| Pilot hydraulic system | 1117132182 |
| Pilot pump | 16ml/r |
| Displacement of pump | 5THF606-2X |
| Fuel | 400L |
| QSM11 | 33L |
| Gearbox/torque converter oil | 60L |
| Working hydraulic oil | 340L |
| Gear oil for drive axle | 54L/piece |
Torque Converter
| Specification | Value |
|---|---|
| Type | 1 stage, 3- elements |
| Coefficient of torque converter | k=2.248 |
| Cooling method | Wind cooling |
| Diametre of cycle | 370mm |
Transmission
| Specification | Value |
|---|---|
| Model | 4WG-260 |
| Gear number | Forward 4 / reverse 3 |
| Forward I / reverse I | 4.187/4 187 |
| Forward II/ reverse II | 2.207/2.207 |
| Forward III/ reverse III | 0.970/0.970 |
| Forward IV/ reverse IV | 0.625 |
Front/Rear axle
| Specification | Value |
|---|---|
| Model | ZF MT-L3105 |
| Total speed ratio | 23.334 |
| Types front/rear | 1 stage: speed reduction /planetary reduction |
| Rim reduction | 6 |
